{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Copy mill MFH with bore 100/7 mm
Article no.: 222065 100/7
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Milling application | Circular milling; Plunging; Ramping | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 76 mm | |
| maximum cutting depth ap max | 2 mm | |
| maximum cutting depth ap max for LD geometry | 5 mm | |
| Overall length Ltot | 63 mm | |
| Mounting bore ⌀ | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 176 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Ramping angle αmax | 0,28 degrees | |
| Ramping length L for αmax | 75 mm | |
| Indexable insert size | 14 | |
| suitable indexable insert | SOMT.. | |
| Insert screw | 229719 (20 IP; 4.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Fz Helix | 0,7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222065 100/7 | |
| EAN / GTIN | 4960664707775 | |
| Manufacturer number | THN07697 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Copy mill MFH with bore 100/7 mm
on request
In stock
11 pieces in stock
800,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
683,10 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 7 | 7 |
| Setting angle κ | 10 | 11 |
| Through-coolant | yes | yes |
| Shank type | with bore | with bore |
| Circular interpolation milling ⌀ Dmax | 198 | 198 |
| Type of product | Copy mill | Copy mill |
| Fz Helix | 0,7 | 0,8 |