{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Softcut® 90° indexable end mill MTC Weldon shank 14/1 mm GARANT
Article no.: 215560 14/1
Article code:
- Setting angle κ: 90
- Milling application: End milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 14 mm | |
| Number of cutting edges Z | 1 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 37 mm | |
| Overall length Ltot | 85 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| ⌀ D3 | 12 mm | |
| Circular interpolation milling ⌀ Dmin | 26 mm | |
| Circular interpolation milling ⌀ Dmax | 26 mm | |
| Circular interpolation milling ap | 0,8 mm | |
| Ramping angle αmax | 2,03 degrees | |
| Ramping length L for αmax | 8,5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219825 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215560 14/1 | |
| EAN / GTIN | 4045197408891 | |
| Manufacturer number | 215560 14/1 |
Description
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also into solid. General use in all steels including stainless steels and acid-proof steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).