{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Softcut® 90° indexable face mill MTC with bore 50/4 mm GARANT
Article no.: 215160 50/4
Article code:
- Setting angle κ: 90
- Milling application: Corner milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 50 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Corner milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| ⌀ D3 | 44 mm | |
| Circular interpolation milling ⌀ Dmin | 94 mm | |
| Circular interpolation milling ⌀ Dmax | 98 mm | |
| Circular interpolation milling ap | 0,9 mm | |
| Ramping angle αmax | 0,68 degrees | |
| Ramping length L for αmax | 41,95 mm | |
| suitable indexable insert | AP.. 1805.. | |
| Pack of insert screws | 219808 (15IP; 3.8 Nm) | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 215160 50/4 | |
| EAN / GTIN | 4045197349279 | |
| Manufacturer number | 215160 50/4 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
High precision square shoulder milling cutter with irregular pitch for very smooth cutting, very high precision and cutting power. High performance indexable square shoulder milling cutter with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For corner milling to large depths, also slotting. General use in all steels including stainless steels.
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres (MTM).
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres (MTM).