{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu solid carbide torus cutter HPC 20/3,0 mm
Article no.: 206264 20/3,0
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 5
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 20 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 5 | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 82 mm | |
| Corner radius R1 | 3 mm | |
| Overhang length L1 incl. recess | 100 mm | |
| Recess ⌀ D1 | 19 mm | |
| Overall length L | 150 mm | |
| Shank ⌀ Ds | 20 mm | |
| Feed fz for side milling in short-chipping aluminium | 0,08 mm | |
| Colour ring | yellow | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206264 20/3,0 | |
| EAN / GTIN | 4062406398699 | |
| Manufacturer number | 206264 20/3,0 |
Application Table
N
500
N
450
N
400
N
180
N
140
N
180
N
130
N
110
N
160
N
140
N
120
N
140
N
260
N
260
N
140
N
120
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping non-ferrous materials.
Very high feed rates when plunging vertically. Ramping capability up to 45°.
Tolerances:
RS1 > 0.5 − 1.5 tolerance ±0.03.
RS1 > 1.5 tolerance ±0.05.
Very high feed rates when plunging vertically. Ramping capability up to 45°.
Tolerances:
- Corner radius
RS1 > 0.5 − 1.5 tolerance ±0.03.
RS1 > 1.5 tolerance ±0.05.
Application:
Particularly suitable for finishing work.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Master Alu solid carbide torus cutter HPC 20/3,0 mm
on request
In stock
3 pieces in stock
529,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
355,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
355,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
328,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | Full slot cutting depth 1×D | 0.3×D for side milling ;0.05×D for side milling | 0.3×D for side milling ;0.05×D for side milling | 0.3×D for side milling ;0.05×D for side milling |
| Through-coolant | no | no | no | no |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Flute length Lc | 82 | 38 | 38 | 41 |
| Type | W | N | N | N |
| Corner radius R1 | 3 | 3 | 3 | 3 |
| Type of product | Torus cutter | Torus cutter | Torus cutter | Torus cutter |