{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu PickPocket solid carbide roughing end mill HPC 4 mm
Article no.: 202017 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 4 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 42 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.3×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 6,5 mm | |
| Overhang length L1 incl. recess | 24 mm | |
| Recess ⌀ D1 | 3,7 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner rounding rv | 0,1 mm | |
| Feed fz for slot milling in short-chipping aluminium | 0,03 mm | |
| Feed fz for side milling in short-chipping aluminium | 0,04 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202017 4 | |
| EAN / GTIN | 4062406381004 | |
| Manufacturer number | 202017 4 |
Application Table
N
380
N
300
N
270
N
180
N
130
N
150
N
130
N
110
N
160
N
150
N
140
N
120
N
150
N
220
N
140
N
160
Description
Version:
For roughing and finishing.
Up to 2×D into solid material at very high feed rates and smooth cutting action.
Very high feed rates when plunging vertically.
Ramping capability up to 45°.
Very long overhang for safe machining of deep cavities.
With the latest generation of DLC coating sp2.
Up to 2×D into solid material at very high feed rates and smooth cutting action.
Very high feed rates when plunging vertically.
Ramping capability up to 45°.
Very long overhang for safe machining of deep cavities.
With the latest generation of DLC coating sp2.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.
Note:
A minimum oversize of 0.1×D must be maintained for subsequent finishing operations.