{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC 6 mm
Article no.: 205277 6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Milling profile: WR
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 6 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 35 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.1×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 31 mm | |
| Overhang length L1 incl. recess | 36 mm | |
| Recess ⌀ D1 | 5,7 mm | |
| Overall length L | 75 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner rounding rv | 0,2 mm | |
| Average chip thickness hmax for TPC milling in short-chipping aluminium | 0,036 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205277 6 | |
| EAN / GTIN | 4062406585815 | |
| Manufacturer number | 205277 6 |
Application Table
N
360
N
320
N
300
N
100
N
80
N
130
N
160
Description
Version:
For roughing.
Special profile for machining non-ferrous metals. Significant reduction in the chip volume due to targeted chip fragmentation using the special cutter geometry.
Problem-solver for TPC machining. Ideal for automated production as the risk of chip accumulations in the machine is largely prevented.
Special profile for machining non-ferrous metals. Significant reduction in the chip volume due to targeted chip fragmentation using the special cutter geometry.
Problem-solver for TPC machining. Ideal for automated production as the risk of chip accumulations in the machine is largely prevented.
Note:
Please use tools with HB drive flats for particularly demanding roughing machining tasks. Can be ordered in the Hoffmann Group’s e-shop.
hmax: The values stated in the table are maximum values.
aemax is 0.1 × D for TPC machining.
hmax: The values stated in the table are maximum values.
aemax is 0.1 × D for TPC machining.