{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Steel solid carbide roughing end mill HPC 20 mm
Article no.: 203058 20
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Helix angle characteristic: unequal spacing
- Spacing of the cutters: unequal spacing
Product details
Technical Data
| Series | Pro Steel | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203058 20 | |
| EAN / GTIN | 4045197947710 | |
| Manufacturer number | 203058 20 |
Application Table
P
260
P
240
P
180
P
160
M
80
K
250
Description
Version:
For roughing and finishing.
Up to 0.7×D into solid material at very high feed rates with smooth cutting action.
Up to 0.7×D into solid material at very high feed rates with smooth cutting action.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
HOLEX Pro Steel solid carbide roughing end mill HPC 20 mm
on request
Subsequent delivery
0 pieces in stock
272,55 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
602,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
153 pieces in stock
273,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
579,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
35 pieces in stock
594,55 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 74 mm | 74 mm | |||
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.4×D for side milling |
| Colour ring | green | green | green | green | green |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Tolerance nominal ⌀ | f8 | f8 | |||
| Shank ⌀ Ds | 20 mm | 20 mm | |||
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |