HOLEX Pro Steel solid carbide roughing end mill HPC 10 mm

Article no.: 203058 10

⌀ D_C (mm):

Quantity

Product details

Series		Pro Steel
Cutting edge ⌀ D_C		10 mm
Coating		TiAlN
Tool material		Solid carbide
Standard		Manufacturer’s standard
Type		N
Tolerance nominal ⌀		0 / -0.03
No. of teeth Z		4
Helix angle		38 degrees
Helix angle characteristic		unequal spacing
Spacing of the cutters		unequal spacing
Direction of infeed		horizontal, oblique and vertical
Cutting width a_e for milling operation		Full slot cutting depth 1×D; 0.25×D for side milling
Shank		DIN 6535 HB to h6
Through-coolant		no
Machining strategy		HPC
Flute length L_c		30 mm
Overhang length L₁ incl. recess		38 mm
Recess ⌀ D₁		9,5 mm
Overall length L		80 mm
Shank ⌀ D_s		10 mm
Corner chamfer width at 45°		0,3 mm
Corner chamfer angle		45 degrees
Feed f_z for slot milling in steel < 900 N/mm²		0,06 mm
Feed f_z for side milling in steel < 900 N/mm²		0,08 mm
Colour ring		green
Type of product		End / face mill

260

240

180

160

250

For roughing and finishing.
Up to 0.7×D into solid material at very high feed rates with smooth cutting action.

Optimised flute form, eccentric relief ground, generous chip spaces.

	This article	Recommendations
	HOLEX Pro Steel solid carbide roughing end mill HPC 10 mm	MasterSteel solid carbide roughing end mill HPC TiAlN 10 mm GARANT	MasterSteel solid carbide roughing end mill HPC TiAlN 10 mm GARANT
Coating	TiAlN	TiAlN	TiAlN
Cutting width a_e for milling operation	Full slot cutting depth 1×D ;0.25×D for side milling	Full slot cutting depth 1×D ;0.25×D for side milling	Full slot cutting depth 1×D ;0.1×D for side milling
Colour ring	green	green	green
Overall length L	80	80	100
Standard	Manufacturer’s standard	Manufacturer’s standard	Manufacturer’s standard
Cutting edge ⌀ D_C	10	10	10
Machining strategy	HPC	HPC	HPC