{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 10mm
Article no.: 202307 10
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank form | HB | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0,06 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0,09 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202307 10 | |
| EAN / GTIN | 4045197931702 | |
| Manufacturer number | 202307 10 |
Application Table
N
170
N
140
N
100
P
70
P
60
P
45
M
40
K
55
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||
|---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 10mm
on request
In stock
247 pieces in stock
35,08 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
114 pieces in stock
75,67 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
51 pieces in stock
124,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
558 pieces in stock
63,02 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
121,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
421 pieces in stock
60,49 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
157 pieces in stock
119,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
99 pieces in stock
69,23 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
| Flute length Lc | 22 mm | 25 mm | 25 mm | 25 mm | 25 mm | 22 mm | 25 mm | 25 mm |
| Helix angle | 45 degrees | 38 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 38 degrees | 38 degrees |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |