{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 1,5mm
Article no.: 202307 1,5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 1,5 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 4 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0,005 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0,006 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202307 1,5 | |
| EAN / GTIN | 4045197931573 | |
| Manufacturer number | 202307 1,5 |
Application Table
N
170
N
140
N
100
P
70
P
60
P
45
M
40
K
55
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 1,5mm
on request
In stock
370 pieces in stock
18,17 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
291 pieces in stock
28,98 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
452 pieces in stock
24,15 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
287 pieces in stock
31,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
214 pieces in stock
31,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | TiAlN | AlCrN | AlCrN | AlCrN |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling |
| Overall length L | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm |
| Through-coolant | no | no | no | no | no |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Type | N | N | N | N | N |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |