{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 8 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 19 mm | |
Overhang length L1 incl. recess | 25 mm | |
Recess ⌀ D1 | 7,8 mm | |
Overall length L | 63 mm | |
Shank ⌀ Ds | 8 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0,08 mm | |
Feed fz for side milling in short-chipping aluminium | 0,1 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202002 8 | |
EAN / GTIN | 4062406125769 | |
Manufacturer number | 202002 8 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() GARANT Master Alu PickPocket solid carbide roughing end mill HPC 8 mm
on request
In stock
151 pieces in stock
66,01 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
148 pieces in stock
43,24 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
338 pieces in stock
43,24 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
26 pieces in stock
79,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
254 pieces in stock
63,71 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Overhang length L1 incl. recess | 25 mm | 27 mm | 27 mm | 30 mm | 26 mm |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling |
Standard | DIN 6527 | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 |
Cutting edge ⌀ DC | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm |
Helix angle | 42 degrees | 30 degrees | 45 degrees | 42 degrees | 38 degrees |
No. of teeth Z | 3 | 3 | 3 | 3 | 2 |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |