{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide mini slot drill TiAlN 9,7 mm HOLEX
Article no.: 201842 9,7
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 9,7 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 11 mm | |
| Overall length L | 48 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank form | HB | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0,04 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,045 mm | |
| Correction factor for vc | 1,25 | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201842 9,7 | |
| EAN / GTIN | 4045197543622 | |
| Manufacturer number | 201842 9,7 |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
M
80
M
60
K
90
Description
Version:
Weldon shank similar to DIN 6535 HB.
Economy version.
Economy version.
Note:
Save on regrinding costs:
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide mini slot drill TiAlN 9,7 mm HOLEX
on request
In stock
9 pieces in stock
36,23 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
65 pieces in stock
47,27 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
49 pieces in stock
31,28 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
92,92 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.3×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D | Full slot cutting depth 1×D ;Full slot cutting depth 1×D |
| Overall length L | 48 | 72 | 55 | 72 |
| Standard | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard | DIN 6527 |
| Cutting edge ⌀ DC | 9,7 | 9,7 | 9,7 | 9,7 |
| Flute length Lc | 11 | 22 | 11 | 22 |
| No. of teeth Z | 3 | 2 | 3 | 3 |
| Shank ⌀ Ds | 10 | 10 | 10 | 10 |