{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide mini slot drill TiAlN 1 mm HOLEX
Article no.: 201842 1
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 1 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 2 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0,005 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,006 mm | |
| Correction factor for vc | 1,25 | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201842 1 | |
| EAN / GTIN | 4045197543424 | |
| Manufacturer number | 201842 1 |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
M
80
M
60
K
90
Description
Version:
Weldon shank similar to DIN 6535 HB.
Economy version.
Economy version.
Note:
Save on regrinding costs:
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide mini slot drill TiAlN 1 mm HOLEX
on request
In stock
932 pieces in stock
18,57 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
311 pieces in stock
24,73 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN |
| Standard | Manufacturer’s standard | Manufacturer’s standard |
| Cutting edge ⌀ DC | 1 | 1 |
| Tool material | Solid carbide | Solid carbide |
| Helix angle | 30 | 30 |
| Feed fz for side milling in steel < 900 N/mm2 | 0,006 | 0,006 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical |