{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 5 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | h10 | |
No. of teeth Z | 2 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 13 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer width at 45° | 0,1 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0,02 mm | |
Feed fz for side milling in steel < 750 N/mm2 | 0,023 mm | |
Colour ring | green | |
Type of product | End / face mill |
Article number | 201650 5 | |
EAN / GTIN | 4045197113580 | |
Manufacturer number | 201650 5 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
![]() ![]() Solid carbide slot drill TiAlN 5 mm HOLEX
on request
In stock
341 pieces in stock
20,01 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
31 pieces in stock
66,24 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
71 pieces in stock
38,07 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
140 pieces in stock
31,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
47,27 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
49,34 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 45 | 45 | 45 | 45 | 45 | 45 |
Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D | Full slot cutting depth 1×D ;0.5×D for side milling |
Through-coolant | no | no | no | no | no | no |
Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
Flute length Lc | 13 | 13 | 13 | 13 | 13 | 10 |
Type | N | N | N | N | N | N |
Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 | 6 |