{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 16 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | h10 | |
No. of teeth Z | 2 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 32 mm | |
Overall length L | 92 mm | |
Shank ⌀ Ds | 16 mm | |
Corner chamfer width at 45° | 0,1 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0,08 mm | |
Feed fz for side milling in steel < 750 N/mm2 | 0,1 mm | |
Colour ring | green | |
Type of product | End / face mill |
Article number | 201650 16 | |
EAN / GTIN | 4045197113634 | |
Manufacturer number | 201650 16 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
![]() ![]() Solid carbide slot drill TiAlN 16 mm HOLEX
on request
In stock
58 pieces in stock
85,79 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
43 pieces in stock
182,28 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
147,78 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
204,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
106,49 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
213,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 45 | 45 | 45 | 45 | 45 | 45 |
Colour ring | green | without | without | blue | green | green |
Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Cutting edge ⌀ DC | 16 | 16 | 16 | 16 | 16 | 16 |
No. of teeth Z | 2 | 3 | 3 | 2 | 3 | 2 |
Corner chamfer width at 45° | 0,1 | 0,1 | 0,4 | 0,3 | 0,06 | 0,1 |