{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 1,8 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 2 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 5 mm | |
Overall length L | 50 mm | |
Shank ⌀ Ds | 3 mm | |
Shank form | HA | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0,005 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0,006 mm | |
Correction factor for vc | 1,25 | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 201630 1,8 | |
EAN / GTIN | 4045197264152 | |
Manufacturer number | 201630 1,8 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() Solid carbide slot drill TiAlN 1,8 mm GARANT
on request
In stock
254 pieces in stock
32,09 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
296 pieces in stock
24,15 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
93 pieces in stock
31,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
179 pieces in stock
31,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
18,17 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Colour ring | without | without | without | without | without |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Flute length Lc | 5 | 5 | 5 | 5 | 5 |
Helix angle | 30 | 30 | 45 | 30 | 45 |
Tolerance nominal ⌀ | e8 | e8 | e8 | e8 | e8 |
No. of teeth Z | 2 | 2 | 3 | 3 | 3 |
Shank ⌀ Ds | 3 | 3 | 3 | 3 | 3 |