{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 1,2 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 2 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 4 mm | |
Overall length L | 50 mm | |
Shank ⌀ Ds | 3 mm | |
Shank form | HA | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0,005 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0,006 mm | |
Correction factor for vc | 1,25 | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 201630 1,2 | |
EAN / GTIN | 4045197264114 | |
Manufacturer number | 201630 1,2 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
![]() ![]() Solid carbide slot drill TiAlN 1,2 mm GARANT
on request
In stock
208 pieces in stock
29,79 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
35 pieces in stock
23,58 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
72 pieces in stock
31,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
31,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
258 pieces in stock
18,17 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
61 pieces in stock
24,73 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 90 | 90 | 90 | 90 | 90 | 90 |
Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.3×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D |
Colour ring | without | without | without | without | without | green |
Through-coolant | no | no | no | no | no | no |
No. of teeth Z | 2 | 3 | 3 | 3 | 3 | 3 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |