{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide drill plain shank DIN 6535 HA 15
Article no.: 122771 15
Article code:
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: m7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 15 mm | |
| Coating | AlTiN-Si | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 60,5 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 83 mm | |
| Overall length L | 133 mm | |
| Shank ⌀ Ds | 16 mm | |
| Feed f in steel < 900 N/mm2 | 0,26 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122771 15 | |
| EAN / GTIN | 4062406148355 | |
| Manufacturer number | 122771 15 |
Application Table
N
200
N
160
P
110
P
90
P
80
P
70
P
60
K
90
K
60
Description
Version:
Tool specially matched to drilling holes without through-coolant. Concave major cutting edges and a special flute profile ensure a good chip evacuation. The sturdy cutter geometry with special point geometry and 4 cutting edges ensures drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant and heat-resistant coating.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide drill plain shank DIN 6535 HA 15
on request
In stock
68 pieces in stock
111,32 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
294,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
246,10 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | AlTiN-Si | TiAlN | TiAlN |
| Colour ring | green | green | red |
| Overall length L | 133 mm | 133 mm | 133 mm |
| Through-coolant | no | no | no |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Point angle | 140 degrees | 140 degrees | 140 degrees |
| Tolerance nominal ⌀ | m7 | h7 | h7 |