{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide drill plain shank DIN 6535 HB, TiAlN, ⌀ DC m7 (mm or inch): 3
Article no.: 122772 3
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: DIN 6537 L
- Version: 6×D
- Tolerance nominal ⌀: m7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 L | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 23.5 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 28 mm | |
| Overall length L | 66 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed f in steel < 900 N/mm2 | 0.16 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification & Classification
| Article number |
122772 3
Copy |
|
| EAN / GTIN |
4062406135577
Copy |
|
| Manufacturer number |
122772 3
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
200
suitable for / [m/min]
N
ISO code:
160
suitable for / [m/min]
P
ISO code:
110
suitable for / [m/min]
P
ISO code:
90
suitable for / [m/min]
P
ISO code:
80
suitable for / [m/min]
P
ISO code:
70
suitable for / [m/min]
P
ISO code:
60
suitable for / [m/min]
K
ISO code:
90
suitable for / [m/min]
K
ISO code:
60
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Tool specially matched to drilling holes without through-coolant. Concave major cutting edges and a special flute profile ensure a good chip evacuation. The sturdy cutter geometry with special point geometry and 4 cutting edges ensures drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant and heat-resistant coating.
Note:
Flute length LC = L2 + 1.5 × DC.