{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter 7792VX 40/5 mm
Article no.: 221908 40/5
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Milling application | Circular milling; Plunging; Ramping | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 25 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| Overall length Ltot | 32 mm | |
| Mounting bore ⌀ | 16 mm | |
| Circular interpolation milling ⌀ Dmin | 65 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Ramping angle αmax | 0.59 degrees | |
| Ramping length L for αmax | 24.3 mm | |
| Indexable insert size | 09 | |
| suitable indexable insert | XD.. 0904 | |
| Insert screw | 229918 (T15; 2.1Nm) | |
| Setting angle κ | 13 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221908 40/5 | |
| EAN / GTIN | 2050002058569 | |
| Manufacturer number | 5667475 |
Description
Description:
The unique design of the indexable inserts together with their approach angle in the milling body greatly reduces the radial forces and diverts them into the axial direction. Particularly thick indexable inserts with 4 cutting edges for the heaviest duties and high cost-effectiveness. The tool has particular advantages for face milling and milling deep pockets. With its ground wiper chamfer it is equally well suited also to plunge milling and finish milling operations.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter 7792VX 40/5 mm
on request
Subsequent delivery
0 pieces in stock
£397.78
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
£250.62
plus VAT at the current rate
Prices plus delivery costs
|
|
| Milling application | Circular milling ;Plunging ;Ramping | Circular milling ;Circular milling ;Plunging |
| Machining strategy | HPC | HPC |
| Circular interpolation milling ⌀ Dmin | 65 | 74 |
| Circular interpolation milling ⌀ Dmax | 78 | 78 |
| Ramping angle αmax | 0.59 | 0.62 |
| Ramping length L for αmax | 24.3 | 32.4 |
| Fz Helix | 0.7 | 0.8 |