{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 3 | |
Shank type | with threaded shank | |
Setting angle κ | 90 degrees | |
Milling application | End milling; Circular milling; Ramping | |
Through-coolant | yes | |
Machining strategy | MTC | |
Tool exchange | PowerCard | |
Overall length Ltot | 35 mm | |
⌀ D1 h6 | 12.5 mm | |
⌀ D2 | 20.7 mm | |
Mounting thread M | M12 | |
⌀ D3 | 22 mm | |
Circular interpolation milling ⌀ Dmin | 47 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Ramping angle αmax | 0.72 degrees | |
Ramping length L for αmax | 19.85 mm | |
suitable indexable insert | AP.. 1003 | |
Pack of insert screws | 219814 (8IP; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 215870 25/3 | |
EAN / GTIN | 4045197193087 | |
Manufacturer number | 215870 25/3 |
This article |
Recommendations |
|||
---|---|---|---|---|
Shoulder mill 90°, with threaded shank, ⌀ D / number of teeth Z: 25/3mm
on request
In stock
27 pieces in stock
£218.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
40 pieces in stock
£228.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
£175.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
£266.87
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 3 | 3 | 3 | 3 |
Milling application | End milling; Circular milling; Ramping | Circular milling; Circular milling; Ramping | End milling | Corner milling |
Overall length Ltot | 35 mm | 35 mm | 35 mm | 30 mm |
Through-coolant | yes | yes | yes | yes |
suitable indexable insert | AP.. 1003 | AP.. 1335.. | SO.. 0836.. | LO.U0904.. |
Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm |