{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 100 mm | |
Number of cutting edges Z | 8 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | End milling | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
Overall length Ltot | 50 mm | |
Mounting bore ⌀ | 32 mm | |
suitable indexable insert | SOMT 09T304 | |
Pack of insert screws | 219810 (9IP; 2.2 Nm) | |
Type of product | End / face mill |
Article number | 215050 100/8 | |
EAN / GTIN | 4045197281036 | |
Manufacturer number | 215050 100/8 |
This article |
Recommendations |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
Indexable face / shoulder mill 90°, with bore, ⌀ D / number of teeth Z: 100/8mm
on request
In stock
13 pieces in stock
£642.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
£663.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
£752.64
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
£634.77
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
26 pieces in stock
£734.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
£521.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
£525.33
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
19 pieces in stock
£372.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
£387.82
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
£580.05
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 8 | 8 | 10 | 8 | 10 | 8 | 8 | 8 | 8 | 8 |
Overall length Ltot | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm |
Through-coolant | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes |
suitable indexable insert | SOMT 09T304 | SO.. 1205.. | SO.. 1205.. | SO.. 0836.. | SO.. 0836.. | AP.. 1805.. | AP.. 16.. | SOMT 09T304 | XNEX 0806.. | XNEX 0806.. |
Shank type | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |