{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut® HSI wide pitch 100/8 mm
Article no.: 214906 100/8
Article code:
- Setting angle κ: 90
- Milling application: Corner milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Corner milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum cutting depth ap max | 6 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| suitable indexable insert | SO.. 0836.. | |
| Pack of insert screws | 219863 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 214906 100/8 | |
| EAN / GTIN | 4045197674494 | |
| Manufacturer number | 214906 100/8 |
Description
Version:
Wear-resistant heat-treated steel with corrosion-inhibiting coating. Precise indexable insert seating by use of appropriate torque. Wide and close tooth pitches for individual milling strategies.
Application:
Particularly suitable for machines with lower drive power and for machining at greater depths and small entry diameters.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
GARANT Softcut® HSI wide pitch 100/8 mm
on request
In stock
8 pieces in stock
£634.77
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
£663.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
£642.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
£525.33
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
£387.82
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
£580.05
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 | 8 | 8 | 8 | 8 |
| Overall length Ltot | 50 | 50 | 50 | 50 | 50 | 50 |
| Through-coolant | yes | yes | yes | yes | yes | yes |
| suitable indexable insert | SO.. 0836.. | SO.. 1205.. | SOMT 09T304 | AP.. 16.. | XNEX 0806.. | XNEX 0806.. |
| Shank type | with bore | with bore | with bore | with bore | with bore | with bore |
| Pack of insert screws | 219863 (8IP; 2.2 Nm) | 219833 (15IP; 3.0 Nm) | 219810 (9IP; 2.2 Nm) | 219812 (15IP; 5.0 Nm) | 219798 1 (15IP; 3.8 Nm) | 219798 1 (15IP; 3.8 Nm) |
| Setting angle κ | 90 | 90 | 90 | 90 | 90 | 90 |