{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 20 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | H | |
Tolerance nominal ⌀ | h10 | |
No. of teeth Z | 4 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
Shank | DIN 6535 HB to h6 | |
Through-coolant | no | |
Flute length Lc | 41 mm | |
Overall length L | 104 mm | |
Shank ⌀ Ds | 20 mm | |
Shank form | HB | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0.1 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0.12 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 202760 20 | |
EAN / GTIN | 4045197197801 | |
Manufacturer number | 202760 20 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide milling cutter, TiAlN, ⌀ h10 DC: 20mm
on request
In stock
771 pieces in stock
111.97 £
£72.18
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
80 pieces in stock
£235.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
40 pieces in stock
£235.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2 pieces in stock
£258.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
£258.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
£294.66
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
45 pieces in stock
171.74 £
£117.65
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | TiAlN | TiAlN | TiAlN | uncoated | uncoated | DLC | uncoated |
Colour ring | without | without | without | yellow | yellow | yellow | yellow |
Overall length L | 104 mm | 104 mm | 104 mm | 126 mm | 126 mm | 126 mm | 126 mm |
Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |