{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-Co8, TiAlN, ⌀ DC: 12mm
Article no.: 192930 12
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: js12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.15×D for side milling | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 53 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.18 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.034 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192930 12 | |
| EAN / GTIN | 4045197108906 | |
| Manufacturer number | 192930 12 |
Application Table
N
120
N
101
P
78
P
55
M
17
N
92
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Economy version.
Centre cutting teeth for plunging.
Economy version.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Roughing end mill HSS-Co8, TiAlN, ⌀ DC: 12mm
on request
In stock
144 pieces in stock
£43.84
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
19 pieces in stock
£48.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
£53.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
122 pieces in stock
£47.43
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
50 pieces in stock
£64.97
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
55 pieces in stock
61.40 £
£26.56
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
97 pieces in stock
£39.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
104 pieces in stock
73.91 £
£42.08
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
£53.45
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without | yellow | yellow | without | without | without | without |
| Milling profile | HR | NF | NF | WR | WR | NR | NR | HR | NR |
| Overall length L | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm |
| Cutting edge ⌀ DC | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 |
| Tolerance nominal ⌀ | js12 | k10 | js12 | js14 | js14 | k12 | js12 | k12 | k12 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |