{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High performance end mill, uncoated, ⌀ js12 DC: 20mm
Article no.: 191850 20
Article code:
- Tool material: HSS Co 8
- Standard: Manufacturer’s standard
- Milling profile: NF
- Tolerance nominal ⌀: js12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | Manufacturer’s standard | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 45 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.06 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191850 20 | |
| EAN / GTIN | 4045197105578 | |
| Manufacturer number | 191850 20 |
Application Table
N
83
P
28
P
23
P
23
K
23
N
55
Description
Version:
Multi-flute mills with ground chip breaker on flutes.
End cutting teeth for plunging.
Special surface treatment.
End cutting teeth for plunging.
Special surface treatment.
Advantage:
Applicable as finishing cutter with particularly high cutting performance.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
High performance end mill, uncoated, ⌀ js12 DC: 20mm
on request
In stock
23 pieces in stock
£64.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
181 pieces in stock
£45.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
45 pieces in stock
£96.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
277 pieces in stock
£50.64
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
92 pieces in stock
£58.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
949 pieces in stock
39.23 £
£27.98
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
261 pieces in stock
72.77 £
£51.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
110 pieces in stock
£64.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
947 pieces in stock
42.72 £
£29.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
£55.07
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
£99.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
£125.49
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 45 degrees |
| Overall length L | 110 mm | 104 mm | 104 mm | 104 mm | 104 mm | 104 mm | 104 mm | 141 mm | 104 mm | 104 mm | 104 mm | 104 mm |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 42 degrees | 30-40 degrees | 30-40 degrees | 30 degrees | 30-40 degrees | 27-30 degrees | 27-30 degrees | 50 degrees |
| Tolerance nominal ⌀ | js12 | e8 | e8 | e8 | e8 | k10 | k10 | k10 | k10 | k12 | k12 | k10 |
| Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |