{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High performance end mill, uncoated, ⌀ js12 DC: 18mm
Article no.: 191850 18
Article code:
- Tool material: HSS Co 8
- Standard: Manufacturer’s standard
- Milling profile: NF
- Tolerance nominal ⌀: js12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 18 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | Manufacturer’s standard | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 40 mm | |
| Overall length L | 105 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.05 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191850 18 | |
| EAN / GTIN | 4045197105554 | |
| Manufacturer number | 191850 18 |
Application Table
N
83
P
28
P
23
P
23
K
23
N
55
Description
Version:
Multi-flute mills with ground chip breaker on flutes.
End cutting teeth for plunging.
Special surface treatment.
End cutting teeth for plunging.
Special surface treatment.
Advantage:
Applicable as finishing cutter with particularly high cutting performance.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
High performance end mill, uncoated, ⌀ js12 DC: 18mm
on request
In stock
15 pieces in stock
£59.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
118 pieces in stock
£39.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
56 pieces in stock
£74.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
121 pieces in stock
£41.46
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
68 pieces in stock
£55.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
175 pieces in stock
£45.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
94 pieces in stock
£73.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
107 pieces in stock
68.55 £
£50.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,217 pieces in stock
£47.31
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
31 pieces in stock
£44.19
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
£89.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
£104.36
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | TiAlN | uncoated | uncoated | TiAlN | uncoated | TiAlN | uncoated | TiAlN | TiAlN |
| Overall length L | 105 mm | 92 mm | 92 mm | 92 mm | 123 mm | 92 mm | 92 mm | 123 mm | 92 mm | 92 mm | 92 mm | 92 mm |
| Tool material | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.05 mm | 0.03 mm | 0.03 mm | 0.03 mm | 0.033 mm | 0.034 mm | 0.034 mm | 0.045 mm | 0.034 mm | 0.05 mm | 0.05 mm | 0.066 mm |
| No. of teeth Z | 4 | 3 | 3 | 3 | 3 | 4 | 6 | 6 | 4 | 4 | 4 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal and oblique | horizontal, oblique and vertical | horizontal and oblique | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |