{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Semi-roughing end mill, TiAlN, ⌀ k12 DC: 12mm
Article no.: 191720 12
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NF
- Tolerance nominal ⌀: k12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 4 | |
| Helix angle | 27-30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 26 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.042 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191720 12 | |
| EAN / GTIN | 4045197104960 | |
| Manufacturer number | 191720 12 |
Application Table
N
120
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Size 10 − 30 centre cutting teeth for plunging.
or a considerable performance improvement with special ground chip breaker flutes.
or a considerable performance improvement with special ground chip breaker flutes.
Advantage:
The chip breaker flutes facilitate chip evacuation and at the same time ensure a good component surface finish.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Semi-roughing end mill, TiAlN, ⌀ k12 DC: 12mm
on request
In stock
165 pieces in stock
£51.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
244 pieces in stock
£19.09
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
147 pieces in stock
£45.97
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
553 pieces in stock
£24.84
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
232 pieces in stock
£28.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
645 pieces in stock
17.30 £
£12.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
103 pieces in stock
34.85 £
£24.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
141 pieces in stock
£31.43
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
800 pieces in stock
20.18 £
£13.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
£31.76
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
26 pieces in stock
£38.66
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
55 pieces in stock
£62.38
plus VAT at the current rate
Prices plus delivery costs
|
|
| Standard | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | Manufacturer’s standard | DIN 844 B |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Cutting edge ⌀ DC | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |
| Tool material | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM |
| Helix angle | 27-30 degrees | 30 degrees | 30 degrees | 30 degrees | 42 degrees | 30-40 degrees | 30-40 degrees | 30 degrees | 30-40 degrees | 27-30 degrees | 30 degrees | 50 degrees |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal and oblique | horizontal, oblique and vertical | horizontal and oblique | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |