{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Mini milling cutter HSS-Co8, uncoated, ⌀ e8 DC: 4mm
Article no.: 191400 4
Article code:
- Tool material: HSS Co 8
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Flute length Lc | 11 mm | |
| Overall length L | 42 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.005 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191400 4 | |
| EAN / GTIN | 4045197102492 | |
| Manufacturer number | 191400 4 |
Application Table
N
83
P
30
P
25
P
25
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground. General-purpose cutting edge geometry. Shank similar to DIN 1835 B with shank tolerance h6. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
Eccentric relief ground. General-purpose cutting edge geometry. Shank similar to DIN 1835 B with shank tolerance h6. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
Note:
Save the regrinding costs: it is cheaper to use a mini slot drill to the limit of wear and throw it away, than to regrind it.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||
|---|---|---|---|---|---|---|---|
Mini milling cutter HSS-Co8, uncoated, ⌀ e8 DC: 4mm
on request
In stock
105 pieces in stock
£7.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
183 pieces in stock
£16.33
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
160 pieces in stock
£32.17
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
80 pieces in stock
£6.41
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
389 pieces in stock
£14.76
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
277 pieces in stock
£16.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
340 pieces in stock
35.74 £
£25.55
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 42 mm | 63 mm | 63 mm | 38 mm | 38 mm | 42 mm | 55 mm |
| Standard | Manufacturer’s standard | DIN 844 B | DIN 844 B | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | DIN 844 |
| Cutting edge ⌀ DC | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm |
| Flute length Lc | 11 mm | 19 mm | 19 mm | 7 mm | 7 mm | 11 mm | 12 mm |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees |
| No. of teeth Z | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |