{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Mini milling cutter HSS-Co8 3,5 mm
Article no.: 191400 3,5
Article code:
- Tool material: HSS Co 8
- Norm: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 3.5 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Norm | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Flute length Lc | 10 mm | |
| Overall length L | 41 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.003 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191400 3,5 | |
| EAN / GTIN | 4045197102485 | |
| Manufacturer number | 191400 3,5 |
Application Table
N
83
P
30
P
25
P
25
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground. General-purpose cutting edge geometry. Shank similar to DIN 1835 B with shank tolerance h6. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
Eccentric relief ground. General-purpose cutting edge geometry. Shank similar to DIN 1835 B with shank tolerance h6. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
Note:
Save the regrinding costs: it is cheaper to use a mini slot drill to the limit of wear and throw it away, than to regrind it.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Mini milling cutter HSS-Co8 3,5 mm
on request
In stock
5 pieces in stock
£7.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
108 pieces in stock
£11.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
134 pieces in stock
£13.77
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
87 pieces in stock
£18.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
£6.41
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
118 pieces in stock
£10.11
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 41 | 54 | 54 | 59 | 37 | 54 |
| Helix angle | 30 | 30 | 30 | 30 | 30 | 30-40 |
| Type | N | N | N | N | N | N |
| No. of teeth Z | 3 | 3 | 3 | 3 | 3 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 | 6 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |