{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer H7, uncoated, Nominal ⌀ DC: 35mm
Article no.: 164000 35
Article code:
- Tolerance: H7
- Number of cutting edges Z: 10
Product details
Technical Data
| Nominal ⌀ DC | 35 mm | |
| Tolerance | H7 | |
| Flute length Lc | 78 mm | |
| Overhang L1 | 195 mm | |
| Overall length L | 321 mm | |
| Number of cutting edges Z | 10 | |
| Morse taper MT size | 4 | |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | |
| Reaming oversize in diameter | 0.3 mm - 0.5 mm |
Identification numbers & Classifications
| Article number | 164000 35 | |
| EAN / GTIN | 4045197092069 | |
| Manufacturer number | 164000 35 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Reamers finish ground for fit H7.
Reamers finish ground for fit H7.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer H7, uncoated, Nominal ⌀ DC: 35mm
on request
In stock
12 pieces in stock
£150.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 2-3 weeks
0 pieces in stock
£234.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
£377.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
£359.06
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
£203.88
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
36 pieces in stock
£170.07
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 10 | 10 | 8 | 8 | 10 | 10 |
| Overhang L1 | 195 mm | 195 mm | 139 mm | 139 mm | 177 mm | 175 mm |
| Colour ring | green | green | without | without | ||
| Nominal ⌀ DC | 35 mm | 35 mm | 35 mm | 35 mm | 35 mm | 35 mm |
| Flute length Lc | 78 mm | 78 mm | 25 mm | 25 mm | 142 mm | 142 mm |
| Tool material | HSS | HSS | HSS | HSS | ||
| Application for type of drilling | for through holes | for blind holes | for through holes | for through hole | ||