{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master TM plain shank thread mill with countersink 2.5×D, TiAlN, MF: 14X1,5
Article no.: 139683 14X1,5
Article code:
- Thread type: MF; MF-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA to h6
Product details
Technical Data
| Thread size | M14×1.5 | |
| Coating | TiAlN | |
| Thread type | MF; MF-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 1.5 mm | |
| Nominal ⌀ DC | 12 mm | |
| Flute length Lc | 35.25 mm | |
| Shank length Ls | 48 mm | |
| Overall length L | 106 mm | |
| Shank ⌀ Ds | 16 mm | |
| Neck ⌀ D1 | 14.5 mm | |
| Programming value for countersink L1 | 36.5 mm | |
| Through-coolant | yes | |
| No. of teeth Z | 6 | |
| Application for type of drilling | up to 2×D for blind holes; up to 2.5×D for through holes | |
| Spacing of the cutters | unequal spacing | |
| Countersink angle | 90 degrees | |
| Feed fz in steel < 750 N/mm2 | 0.1 mm | |
| Number of clamping slots | 6 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread depth | 35.25 mm | |
| Series | Master TM | |
| Type of product | thread milling cutter |
Identification numbers & Classifications
| Article number | 139683 14X1,5 | |
| EAN / GTIN | 4045197958075 | |
| Manufacturer number | 139683 14X1,5 |
Application Table
N
200
N
190
N
160
P
125
P
115
P
110
P
80
P
70
M
75
M
70
S
45
K
105
N
175
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- New coating for optimum wear resistance.
- Corrected thread profile for avoidance of profile distortions.
Advantage:
Incorporating a countersink profile for a 90° countersink and thread milling in a single operation.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Master TM plain shank thread mill with countersink 2.5×D, TiAlN, MF: 14X1,5
on request
In stock
10 pieces in stock
423.53 £
£272.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
£220.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
411.48 £
£187.58
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
62 pieces in stock
318.81 £
£219.95
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | green | green | green | green |
| Flank angle | 60 degrees | 60 degrees | 60 degrees | 60 degrees |
| Thread standard | DIN 13 | DIN 13 | DIN 13 | DIN 13 |
| Nominal ⌀ DC | 12 mm | 11.6 mm | 12 mm | 11.95 mm |
| Shank length Ls | 48 mm | 45 mm | 48 mm | 45 mm |
| Thread depth | 35.25 mm | 30.7 mm | 28 mm | 26.25 mm |
| Application for type of drilling | up to 2×D for blind holes; up to 2.5×D for through holes | up to 2×D for blind holes; up to 2×D for through holes | up to 2×D for blind holes; up to 2×D for through holes | up to 2×D for blind holes; up to 2×D for through holes |