{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 4.1 mm | |
Coating | TiAlN | |
Tool material | solid carbide | |
Standard | DIN 6539 | |
Type | N | |
Tolerance nominal ⌀ | h7 | |
Number of cutting edges Z | 2 | |
Point angle | 118 degrees | |
recommended maximum drilling depth L2 | 15.9 mm | |
Helix angle | 30 degrees | |
Shank | Parallel shank to h7 | |
Through-coolant | no | |
Flute length Lc | 22 mm | |
Overall length L | 55 mm | |
Shank ⌀ Ds | 4.1 mm | |
Shank tolerance | h7 | |
Feed f in steel < 1100 N/mm2 | 0.08 mm/rev. | |
Colour ring | without | |
Type of product | Jobber drill |
Article number | 122151 4,1 | |
EAN / GTIN | 4045197748324 | |
Manufacturer number | 122151 4,1 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Solid carbide jobber drill extra short 4,1 mm
on request
In stock
200 pieces in stock
£16.88
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
134 pieces in stock
£10.56
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
180 pieces in stock
£11.98
plus VAT at the current rate
Prices plus delivery costs
|
|
Colour ring | without | without | without |
Overall length L | 55 mm | 55 mm | 55 mm |
Shank tolerance | h7 | h7 | h7 |
Tool material | solid carbide | Solid carbide | Solid carbide |
Tolerance nominal ⌀ | h7 | h7 | h7 |
Shank ⌀ Ds | 4.1 mm | 4.1 mm | 4.1 mm |
Type of product | Jobber drill | Jobber drill | Jobber drill |