IMPACT-sarja 6-kulma, 1/2″ ohutseinäinen, muovihylsy

Tuote nro.: 651241
plus lakisääteinen alv. Hinnat ja toimituskustannukset
pyynnöstä
Varastossa
10 kappaletta varastossa

Valitse tuotevaihtoehto ja määrä

Yksikköhinta sis. alv
  • Vääntönelikulma: 1/2

Lisää ostoslistalle

    Jaa tämä tuote

    tai kopioi tämä linkki

    Tuotetiedot

    Tekniset tiedot

    Vääntönelikulma 1/2 tuuma
    Irrotusprofiili 6-kulmainen holkkiavain
    Osien määrä 3
    soveltuu käytettäväksi koneissa kyllä
    Tuotetyyppi Avainhylsy

    Tunnistenumerot ja Luokitukset

    Tuotekoodi 651241
    EAN / GTIN 4991644506286
    Valmistajan numero 14201M

    Kuvaus

    Version:

    Sturdy shape especially for use with electric or compressed air impact wrenches. With cross hole and snap ring groove for securing sockets. Internal square to DIN 3121.
    For safety reasons must always be secured using a suitable locking pin and O-ring.
    When changing wheels and tyres, it is important that the nuts or screws are tightened correctly in order to ensure safe driving. You can use a hex socket with plastic sleeve to ensure that the nuts or screws are tight enough, without damaging the rims. The socket is also suitable for impact wrenches.
    The plastic sleeve protects the rims and prevents scratches or other damage that may be caused by the tool. You can therefore be sure that your vehicle is always in top condition.
    The socket is an important part of any garage. Whether you are working on your vehicle yourself or are having your wheels and tyres replaced by a specialist, make sure you have this tool on hand.

    Advantage:

    • Smaller ⌀ and perfectly matched overall length of the socket permits working on bolts where access is difficult.
    • Protective sleeve prevents damage to delicate components (such as aluminium rims).
    • Can be positioned while the wrench is running, because the protective sleeve is free-running.
    • Quick differentiation of the sockets due to colour coding.
    • The torsion zone permits the socket to accept high loadings.
    • The plastic stop on the inside protects the sensitive surfaces of the wheel nut.

    Application:

    Especially for avoiding damage to delicate components ( such as alloy wheel rims) during assembly.

    Standard:

    DIN 3129

    Material:

    Chromium-molybdenum steel, manganese phosphated.

    Content:

    1 each socket No. 651240: Size 17; 19; 21

    Note:

    For spare protective sleeves see No. 651242

    Ladattavat tiedostot & asiakirjat

    Sopivat tuotteet

    Varaosat

    Palvelut & tuoteneuvojat

    Suoraosto

    Kirjaudu tilillesi

    Oletko uusi asiakas?

    Ostoskorissa

    Ostoskoriin
    Ostoskoriin