{{ name }}
Tuote nro. {{ combinedCodeWithHighlight }}
Tuotekoodi:
EAN / GTIN:
Valmistajan numero:
Pull stud 90° sealed 40
Tuote nro.: 308790 40
Tuotekoodi:
- Pull stud standard: MAS 403
Tuotetiedot
Tekniset tiedot
| suitable for steep tapers | 40 | |
| Hole characteristics | without bore | |
| Pull stud standard | MAS 403 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 15 mm | |
| Overall length L | 60 mm | |
| L1 | 35 mm | |
| Thread M | M16 | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Tunnistenumerot ja Luokitukset
| Tuotekoodi | 308790 40 | |
| EAN / GTIN | 4045197377876 | |
| Valmistajan numero | 308790 40 |
Kuvaus
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Ladattavat tiedostot & asiakirjat
Verrataan vastaaviin tuotteisiin
Tämä artikkeli |
Suositukset |
|||
|---|---|---|---|---|
Pull stud 90° sealed 40 |
||||
| Collar ⌀ D | 23 mm | 23 mm | 23 mm | 23 mm |
| Thread M | M16 | M16 | M16 | M16 |
| suitable for steep tapers | 40 | 40 | 40 | 40 |
| suitable for taper arbors with colour code | SK 40 | SK 40 | SK 40 | SK 40 |
| Width across flats | 19 mm | 19 mm | 19 mm | 19 mm |
| Hole characteristics | without bore | without bore | without bore | without bore |
| Type of product | Pull Stud | Pull Stud | Pull Stud | Pull Stud |