{{ name }}
Tuote nro. {{ combinedCodeWithHighlight }}
Tuotekoodi:
EAN / GTIN:
Valmistajan numero:
Indexable drill combination shank Shank 20 mm 3×D 15 mm GARANT
Tuote nro.: 232302 15
Tuotekoodi:
- Drill depth for indexable insert drill up to: 3×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex
- Through-coolant: yes
- Machining strategy: MTC
Tuotetiedot
Tekniset tiedot
| Nominal ⌀ D | 15 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Reach L1 | 45 mm | |
| for inch ⌀ | 19/32 in | |
| Overhang LA | 69 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| Maximum adjustment limit Vmax | 0,5 mm | |
| ISO code indexable insert | WOEX 030204 | |
| Pack of insert screws | 239700 6IP (0.6 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 119 mm | |
| Type of product | Indexable drill |
Tunnistenumerot ja Luokitukset
| Tuotekoodi | 232302 15 | |
| EAN / GTIN | 4045197351715 | |
| Valmistajan numero | 232302 15 |
Kuvaus
Version:
High stability and very high process reliability.
With shank ⌀ 20 mm, particularly suitable for driven tools (see Group 31).
With shank ⌀ 20 mm, particularly suitable for driven tools (see Group 31).
Application:
For stationary and rotating application.
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Suitable for:
Inserts WOEX 030204.
Note:
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
The enquiry form can be found in the eShop on the product page under “Forms”.
CAUTION!
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
The enquiry form can be found in the eShop on the product page under “Forms”.
CAUTION!
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Ladattavat tiedostot & asiakirjat
Verrataan vastaaviin tuotteisiin
Tämä artikkeli |
Suositukset |
|
|---|---|---|
Indexable drill combination shank Shank 20 mm 3×D 15 mm GARANT
pyynnöstä
Varastossa
9 kappaletta varastossa
338,10 €
plus lakisääteinen alv.
Hinnat ja toimituskustannukset
|
pyynnöstä
Varastossa
7 kappaletta varastossa
362,25 €
plus lakisääteinen alv.
Hinnat ja toimituskustannukset
|
|
| Number of cutting edges Z | 1 | 1 |
| Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex |
| Shank length Ls | 50 mm | 56 mm |
| Reach L1 | 45 mm | 45 mm |
| for inch ⌀ | 19/32 in | 19/32 in |
| Type of product | Indexable drill | Indexable drill |
| Overhang LA | 69 mm | 69 mm |