{{ name }}
Tuote nro. {{ combinedCodeWithHighlight }}
Tuotekoodi:
EAN / GTIN:
Valmistajan numero:
GARANT Softcut HSI, with threaded shank, ⌀ D / number of teeth Z: 32/2mm
Tuote nro.: 214853 32/2
Tuotekoodi:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Tuotetiedot
Tekniset tiedot
| Series | Softcut® | |
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum cutting depth ap max | 10 mm | |
| Overall length Ltot | 42 mm | |
| ⌀ D1 h6 | 17 mm | |
| ⌀ D2 | 28.7 mm | |
| Mounting thread M | M16 | |
| suitable indexable insert | SO.. 1205.. | |
| Pack of insert screws | 219833 (15IP; 3.0 Nm) | |
| Type of product | End / face mill |
Tunnistenumerot ja Luokitukset
| Tuotekoodi | 214853 32/2 | |
| EAN / GTIN | 4045197608680 | |
| Valmistajan numero | 214853 32/2 |
Kuvaus
Version:
Individual tool geometry ensures very smooth cutting. Exceptionally sturdy insert design for best feed rates. Indexable inserts are secured by special screws with high shear resistance.
Application:
For outstanding surface quality. Burr-free milling.
Note:
Ladattavat tiedostot & asiakirjat
Verrataan vastaaviin tuotteisiin
Tämä artikkeli |
Suositukset |
|
|---|---|---|
GARANT Softcut HSI, with threaded shank, ⌀ D / number of teeth Z: 32/2mm |
||
| Mounting thread M | M16 | M16 |
| Milling application | End milling | Ramping; Circular milling; Plunging |
| Overall length Ltot | 42 mm | 35 mm |
| Through-coolant | yes | yes |
| Shank type | with threaded shank | with threaded shank |
| Setting angle κ | 90 degrees | 90 degrees |
| Type of product | End / face mill | End / face mill |