{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KUB Pentron® indexable drill Plain shank 30,5 mm
Article no.: 236602 30,5
Article code:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 30.5 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 155 mm | |
| Overhang LA | 179 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| ISO code indexable insert | SOGX 100408 32-... | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 236602 30,5 | |
| EAN / GTIN | 4047109197589 | |
| Manufacturer number | U45 33050 |
Description
Version:
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Bore tolerance: ⌀D − 0.1 / + 0.35
Application:
Supplied with:
Clamp screws (without indexable inserts).
Recommendation:
When spot-drilling reduce the feed rate by 70 %.
Note:
Version with PSC shank available on request.
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
KUB Pentron® indexable drill Plain shank 30,5 mm
on request
Available in 2-3 weeks
0 pieces in stock
863,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
668,15 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Drill depth for indexable insert drill up to | 5×D | 5×D |
| Through-coolant | yes | yes |
| Shank | ISO 9766 | ISO 9766 |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | 239700 10IP (2.8 Nm) |
| Machining strategy | HPC | HPC |
| Reach L1 | 155 | 155 |
| Series | KUB Pentron® | Power Drill |