{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut® HSI close pitch 63/6 mm
Article no.: 214857 63/6
Article code:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 6 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum cutting depth ap max | 10 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | SO.. 1205.. | |
| Pack of insert screws | 219833 (15IP; 3.0 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 214857 63/6 | |
| EAN / GTIN | 4045197553461 | |
| Manufacturer number | 214857 63/6 |
Description
Version:
Individual tool geometry ensures very smooth cutting. Exceptionally sturdy insert design for best feed rates. Indexable inserts are secured by special screws with high shear resistance.
Application:
For outstanding surface quality. Burr-free milling.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
GARANT Softcut® HSI close pitch 63/6 mm
on request
In stock
42 pieces in stock
€688.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
€642.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
19 pieces in stock
€615.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
€480.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
119 pieces in stock
€431.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
€555.45
plus VAT at the current rate
Prices plus delivery costs
|
|
| Mounting bore ⌀ | 22 | 22 | 22 | 22 | 22 | 22 |
| Milling application | End milling | Corner milling | End milling | End milling | End milling | End milling |
| Overall length Ltot | 40 | 40 | 40 | 40 | 40 | 40 |
| Through-coolant | yes | yes | yes | yes | yes | yes |
| Cutting edge ⌀ DC | 63 | 63 | 63 | 63 | 63 | 63 |
| Pack of insert screws | 219833 (15IP; 3.0 Nm) | 219863 (8IP; 2.2 Nm) | 219810 (9IP; 2.2 Nm) | 219812 (15IP; 5.0 Nm) | 219798 1 (15IP; 3.8 Nm) | 219798 1 (15IP; 3.8 Nm) |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |