{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Coating | uncoated | |
Tool material | HSS Co 8 | |
Standard | DIN 844 B | |
Milling profile | WR | |
Tolerance nominal ⌀ | js14 | |
No. of teeth Z | 3 | |
Helix angle | 36 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 90 mm | |
Overall length L | 166 mm | |
Shank ⌀ Ds | 25 mm | |
Corner chamfer width at 45° | 0.5 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.09 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 192520 25 | |
EAN / GTIN | 4045197106735 | |
Manufacturer number | 192520 25 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() Roughing end mill HSS-Co8 25 mm
on request
In stock
86 pieces in stock
€ 198,38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
€ 146,05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
56 pieces in stock
€ 133,98
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
€ 148,93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
137 pieces in stock
€ 197,80
plus VAT at the current rate
Prices plus delivery costs
|
|
Colour ring | yellow | without | without | without | green |
Milling profile | WR | NF | NR | NR | HR |
Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
Tolerance nominal ⌀ | js14 | k10 | js12 | js12 | ±0.12 |
No. of teeth Z | 3 | 3 | 3 | 3 | 5 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 25 | 25 | 25 | 25 | 25 |