{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 20 mm | |
Coating | uncoated | |
Tool material | HSS Co 8 | |
Standard | DIN 844 B | |
Milling profile | WR | |
Tolerance nominal ⌀ | js14 | |
No. of teeth Z | 3 | |
Helix angle | 36 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 75 mm | |
Overall length L | 141 mm | |
Shank ⌀ Ds | 20 mm | |
Corner chamfer width at 45° | 0.5 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.08 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 192520 20 | |
EAN / GTIN | 4045197106711 | |
Manufacturer number | 192520 20 |
This article |
Recommendations |
|||
---|---|---|---|---|
Roughing end mill HSS-Co8, uncoated, ⌀ js14 DC: 20mm
on request
In stock
77 pieces in stock
€129.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
€123.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
162 pieces in stock
€118.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
€148.93
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
Milling profile | WR | NF | HR | NR |
Overall length L | 141 mm | 141 mm | 141 mm | 141 mm |
Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm |
Flute length Lc | 75 mm | 75 mm | 75 mm | 75 mm |
Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm |