{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Wheel brush knotted RBG dia. 76x6 mm shank dia. 6 mm steel wire dia. 0.35
Número de artículo: 4007220153161
Código del artículo:
Tenga en cuenta el mayor plazo de entrega y el servicio de asesoramiento técnico limitado:
Pedimos este artículo para usted directamente al fabricante, ya que no forma parte de nuestra gama principal y, por tanto, no lo tenemos en stock.
InformaciónDetalles de producto
Datos técnicos
| Type of product | Wheel brush |
Números de identificación y clasificaciones
| Número de artículo | 4007220153161 | |
| EAN / GTIN | 4007220153161 | |
| Número del fabricante | 43107001 | |
| Número L | L51510 424 |
Descripción
Description:
Aggressive brush for cleaning, derusting and work on weld seams. Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire withstands temperatures up to 300 °C.
Feature:
- Number, knots: 18 Stück
- Packaging: Industrial packaging
- RPM, max.: 25000 RPM
- RPM, optimum, from: 12500 RPM
- RPM, optimum, to: 18800 RPM
- Width, metric: 6 mm
- Mounting system: Shank
- Dia. filament material: 0.35 mm
- Dia. external, metric: 76 mm
- Dia. shank, metric: 6 mm
- Filament material: Steel wire (ST)
- Length, filament: 16 mm
- Length, total: 42 mm
Advantage:
- Optimal access to hard-to-reach areas such as grooves and recesses.
- Aggressive brushing effect due to the very stiff wire knots.
- Long tool life through use of PFERD special wire.
Application:
- Recommendations for use: Please observe the recommended rotational speeds. For the best results, use a tool drive with a minimum output of 500 watts.
- Applications: Cleaning; Deburring; Derusting; Descaling; Removing oxide layers; Paint stripping; Root seam processing; Work on weld seams; Work on fillet welds
- Drive types: Flexible shaft drive; Power drill; Straight grinder
Material:
- Materials that can be worked:
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
Note:
- When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.