{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Escariador mecánico configurable 42 mm
Número de artículo: 164180 42
Código del artículo:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Detalles de producto
Datos técnicos
| Nominal ⌀ DC | 42 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 41,060 mm - 42,050 mm | |
| Flute length Lc | 82 mm | |
| Overhang L1 | 211 mm | |
| Overall length L | 333 mm | |
| Number of cutting edges Z | 12 | |
| Morse taper MT size | 4 | |
| Feed f in steel < 750 N/mm2 | 0,35 mm/rev. | |
| Reaming oversize in diameter | 0,3 mm - 0,5 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Números de identificación y clasificaciones
| Número de artículo | 164180 42 | |
| EAN / GTIN | 4062406264208 | |
| Número del fabricante | 164180 42 |
Tablas de Aplicación
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Descripción
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.