{{ name }}
Art.-nr. {{ combinedCodeWithHighlight }}
Sagsnummer:
EAN/GTIN:
Producentnummer:
HiPer-Drill basiselement, 1,5×D, ⌀ DC: 31mm
Art.-nr.: 231600 31
Sagsnummer:
- Udførelse: 1,5×D
- Skaft: ISO 9766
- Boranvendelse: Betinget tværboring; Betinget pakkeboring; Betinget skrå udgang; Betinget skrå forboring
- Number of cutting edges Z: 2
- Indvendig køling: ja
Produktdetaljer
Teknisk data
| Series | HiPer-Drill | |
| Udførelse | 1,5×D | |
| Skaft | ISO 9766 | |
| Boranvendelse | Betinget tværboring; Betinget pakkeboring; Betinget skrå udgang; Betinget skrå forboring | |
| Number of cutting edges Z | 2 | |
| Indvendig køling | ja | |
| Dia. range Dc | 31 mm - 31.99 mm | |
| Reach L1 | 48 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| Clamping screw | 231999 20IP (7.5 Nm) | |
| Overall length L | 152 mm | |
| Produkttype | Vendeplattebor |
Identifikationsnumre og klassifikationer
| Artikelnummer | 231600 31 | |
| EAN/GTIN | 4045197602701 | |
| Producentnummer | 231600 31 |
Betegnelse
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.