{{ name }}
Artiklové číslo {{ combinedCodeWithHighlight }}
Vaše materiálové číslo:
EAN / GTIN:
Číslo výrobce:
Vrták do plného KOMET KUB Pentron® s vyměnitelnými destičkami válcová stopka 34,5 mm
Artiklové číslo: 236615 34,5
Vaše materiálové číslo:
- Drill depth for indexable insert drill up to: 3×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Údaje o výrobku
Technické údaje
| Series | KUB Pentron® | |
| Nominal ⌀ D | 34.5 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 105 mm | |
| Overhang LA | 131 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| ISO code indexable insert | SOGX 110408 38-... | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identifikační čísla a klasifikace
| Katalogové číslo | 236615 34,5 | |
| EAN / GTIN | 4047109277090 | |
| Číslo výrobce | U43 33450 |
Popis
Version:
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Bore tolerance: ⌀D − 0.1 / + 0.2
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.
Ke stažení & dokumenty
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Vrták do plného KOMET KUB Pentron® s vyměnitelnými destičkami válcová stopka 34,5 mm
na poptávku
Ihned k dodání
2 ks okamžitě k dodání
15 028,00 CZK
bez DPH v platné výši
plus náklady na dopravu
|
na poptávku
Ihned k dodání
10 ks okamžitě k dodání
516,35 €
bez DPH v platné výši
plus náklady na dopravu
|
|
| Bohrverwendung | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling |
| Innenkühlung | yes | yes |
| Nenn-⌀ D | 34.5 | 34,5 |
| Schaft | ISO 9766 | ISO 9766 |
| Nutzlänge L1 | 105 | 105 |
| Serie | KUB Pentron® | Power Drill |
| Produktart | Indexable drill | Indexable drill |