{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Support leg with power and compressed air DK
Réf.: 927068 DK
Référence:
- Design version: Steel hollow section construction
- Colour selection: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Détails du produit
Caractéristiques techniques
| Design version | Steel hollow section construction | |
| Material thickness | 1 mm | |
| Colour selection | RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003 | |
| Height | 900 mm | |
| Width | 50 mm | |
| Depth | 700 mm | |
| Socket type | K | |
| Nominal voltage | 250 V | |
| Rated current | 16 A | |
| suitable for worktop depth | 750 mm | |
| Type of product | Power module |
Numéros d’identification et classifications
| Référence article | 927068 DK | |
| EAN / GTIN | 4062406755690 | |
| Réf. fabricant | 927068 DK |
Description
Version:
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Supplied with:
Support leg with two Schuko sockets with fastening materials, not wired.
Incl. safety one-hand coupling, quick-release coupling nominal value 7.2 and 3/8 inch connection thread, up to 10 bar.
Incl. safety one-hand coupling, quick-release coupling nominal value 7.2 and 3/8 inch connection thread, up to 10 bar.
Colour:
RAL 7035 light grey powder-coated.
Note:
Support legs without rear panel or cupboards require stabilising plates No. 927122 for stiffening. The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.
Pre-assembled workbenches must be secured against tipping.