{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Conduits d'arrosage HSK 25
Réf.: 309880 25
Référence:
Détails du produit
Caractéristiques techniques
| Pour porte-outils | HSK 25 | |
| Filetage M | M8×1 | |
| ⌀ D | 5 mm | |
| Longueur totale L | 16,8 mm | |
| Pression maximale | 120 bar | |
| Variation angulaire | ±1 degré | |
| Traitement de surface | polie | |
| Type de produit | Conduit d'arrosage |
Numéros d’identification et classifications
| Référence article | 309880 25 | |
| EAN / GTIN | 2050001707802 | |
| Réf. fabricant | 309880 25 |
Description
Version:
Special O-ring up to 120 bar, angular movement from ± 1°, polished, with 2 sealing rings.
Coolant-resistant Viton® seals.
Coolant-resistant Viton® seals.
- Fine polished surface, hardened and burnished.
- Two polished transition radii.
- Full movement thanks to two O-rings.
- Hardened threaded sleeves with rolled, high-compression thread flanks.
Description:
HSK coolant pipe – a small component with a big effect! When tools are changed thousands of times per day, it is important that the interface between the coolant pipe and machine spindle seal remains clean and, above all, that it maintains process reliability.
Suitable for:
HSK tool holders.