{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Grooving toolholder 25/3 mm
Réf.: 273760 25/3
Référence:
Détails du produit
Caractéristiques techniques
| Groove width w | 3 mm | |
| Application type | right-hand | |
| Through-coolant | no | |
| maximum ⌀ | 60 mm | |
| Grooving depth tmax | 30 mm | |
| Functional width L4 | 26.5 mm | |
| Head length L1 | 46 mm | |
| Shank width b | 25 mm | |
| Overall length L | 150 mm | |
| Screw | 279815 6 (TX25; 6 Nm) | |
| axial grooving possible | oui | |
| Type of product | Boring bar |
Numéros d’identification et classifications
| Référence article | 273760 25/3 | |
| EAN / GTIN | 4045197485182 | |
| Réf. fabricant | 273760 25/3 |
Description
Version:
Made of high-tensile tool steel (> 1300 N/mm2). In conjunction with the convex insert clamping, the system achieves very high resistance to axial and radial cutting forces and thereby significantly increases the surface quality and productivity.
10×w
Note:
Maximum ⌀ = limited workpiece ⌀ due to the tool type.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-ended grooving inserts No. 273656 – 273670.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-ended grooving inserts No. 273656 – 273670.