{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
KOMET KUB Centron® drill head 28 mm
Réf.: 236650 28
Référence:
- Use for drilling: Centre drilling; limited cross-drilling; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
Détails du produit
Caractéristiques techniques
| Series | KUB Centron® | |
| Nominal ⌀ D | 28 | |
| Use for drilling | Centre drilling; limited cross-drilling; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Base body size | 26 | |
| Screw for base body | 239652 6IP2 | |
| Centring tip size | 26 | |
| ISO code indexable insert | WOEX 040304 | |
| Pack of insert screws | 239655 6IP (0.6 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Numéros d’identification et classifications
| Référence article | 236650 28 | |
| EAN / GTIN | 4047109025608 | |
| Réf. fabricant | V46 50280 |
Description
Version:
- Process reliable up to 8 (9)×D.
- Centring by centring point and slide bars.
- Stiff joint between base body and drill head.
- ⌀ of the slide bars is matched to indexable inserts with 0.4 mm edge radii. For through holes the ⌀ of the slide bars can be adjusted by means of shims.
Application:
Suitable for:
Supplied with:
Drill head including slide bars (spare slide bars No. 236658).
From ⌀ 65 mm with indexable insert cartridges (cartridge for the outer indexable insert adjustable + 1 mm on the ⌀).
From ⌀ 65 mm with indexable insert cartridges (cartridge for the outer indexable insert adjustable + 1 mm on the ⌀).