{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ET collet with radial compensation for tapping and reaming, ET 25, Nominal clamping ⌀ d: 3,5mm
Article no.: 309447 3,5
Article code:
- Standard: Manufacturer’s standard
Product details
Technical Data
| Nominal clamping ⌀ d | 3.5 mm | |
| Adapter | ET 25 | |
| Standard | Manufacturer’s standard | |
| External ⌀ D | 26 mm | |
| Overall length L | 35 mm | |
| Axial compensation | 0.1 mm | |
| Radial compensation R thread tapping | 0.4 mm | |
| Radial compensation R reaming | 0.05 mm | |
| Type of product | Collet |
Identification numbers & Classifications
| Article number | 309447 3,5 | |
| EAN / GTIN | 4045197782991 | |
| Manufacturer number | 309447 3,5 |
Description
Version:
Hardened and ground.
Advantage:
The radial compensation allows correction of slight centring errors (for the required concentricity and thread or fit quality). Axial compensation of 0.1 mm.
Application:
For tapping and reaming on milling and turning centres.
Suitable for:
All standard ER collet chucks.
Note:
Clamps only the nominal ⌀. Not compatible with the CENTRO P precision ER collet chuck.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
ET collet with radial compensation for tapping and reaming, ET 25, Nominal clamping ⌀ d: 3,5mm
on request
In stock
4 pieces in stock
BGN 214.57
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 pieces in stock
BGN 184.88
plus VAT at the current rate
Prices plus delivery costs
|
|
| Adapter | ET 25 | ET 16 |
| External ⌀ D | 26 mm | 17 mm |
| Overall length L | 35 mm | 29 mm |
| Nominal clamping ⌀ d | 3.5 mm | 3.5 mm |
| Standard | Manufacturer’s standard | Manufacturer’s standard |
| Radial compensation R thread tapping | 0.4 mm | 0.3 mm |
| Type of product | Collet | Collet |